WITH TECHNOLOGY THIS ADVANCED, CLEANER AND QUIETER COME NATURALLY.

* NO SMOKE
* DRAMATICALLY LOWER CO EMISSIONS
* FUEL EFFICIENT
* SUPERIOR SOUND QUALITY

CLEANER & QUIETER. With a fully stratified combustion system, Evinrude E-TEC outboards are designed to comply with 2006 EPA (Environmental Protection Agency) as well as tough 2006 EU (European Union) standards well into the future. E-TEC even meets the ultra-low 2008 CARB (California Air Resource Board) 3-Star emissions rating. For you, it simply means a cleaner boating environment: no smoke and dramatically lower carbon monoxide emissions.

With the E-TEC system, fuel is injected twice as fast as traditional direct injection engines and unburned fuel never reaches the exhaust port. This means the fuel charge never escapes the combustion chamber as it is burned and turned into pure power. E-TEC also senses when to change fuel delivery into the chamber, depending on engine needs, resulting in precision fuel flow and extreme fuel efficiency. The sealed fuel system also minimizes evaporative emissions. And finally, no more pre-mixing fuel and oil thanks to the E-TEC auto-lube oiling system.

And then there's the E-TEC signature sound. The exclusive E-TEC idle air bypass circuit, acoustically tuned air intake and exhaust silencers and state of the art acoustic foam lining combine for an incredibly quiet engine that hums like nothing else on the water.

Click on the links below to view short video clips.

emission I

EMM

Carbon Monoxide

Quieter

Exhaust Port/Piston

* NO SCHEDULED DEALER MAINTENANCE FOR 3 YEARS.
* ZERO BREAK-IN PERIOD
* NO COSTLY OIL CHANGES
* USES UP TO 30-75% LESS OIL THAN COMPETITIVE TECHNOLOGIES

EASY TO OWN AND OPERATE Evinrude E-TEC outboards require no scheduled dealer maintenance - that's right, zero - for the first three years or 300 hours of normal recreational use. Not even gearcase lube. You'll never have to change the oil or the oil filter, which can cost several hundred dollars each year for other technologies.

Evinrude E-TEC uses up to 75% less than typical 2-stroke carbureted engines and up to 50% less oil than competitive direct injection engines (when run with Evinrude/Johnson XD 100T oil with optional dealer programming of the Engine Management Module, versus normal TCW3 oil). And you'll use 30% less oil compared to a 4-stroke with a typical maintenance schedule under normal operating conditions.

That's just the start. The Evinrude E-TEC engines use an exclusive low friction design. There are no belts, no chains, no powerhead gears, no cams, and no mechanized oil pumps.

Click on the following links to watch short video's

No Oil Changes

Auto Lube

Easy to Own

Looking at E-TEC